Connection with internal USB to UART converter

OES Prime devboard has a USB-Serial converter. To enable it set a jumper on UART pins (URX0 and UTX0) and
plug in Micro-USB cable to POWER CONSOLE port on OES Prime.


Connection with external USB to UART converter

You can connect to OES Prime using an external USB to UART converter. This example covers connection with CP2102
controller, but any other applicable devices may be also used. You need to attach URX0 pin to TXD, UTX0 to RXD
and GND to GND like it is demonstrated in the picture below.


To connect over serial and see Linux booting over the serial port you need to follow a couple of simple steps.


Find the name of USB device

With a USB-Serial adapter plugged in, you can get a list of all available devices:

On Linux:

ls /dev/ttyUSB*

Example output:


On MacOS:

ls /dev/cu.*

Example output:


Look for SLAB_USBtoUART on MacOS or ttyUSB on Linux.


screen /dev/tty.SLAB_USBtoUART 115200

#### Login

At the login prompt, type “`root“` and press Enter.

### Windows

– Download and install PuTTy terminal emulator.
– In Device Manager find your COM port.

In this example it is “`COM1“`.

– Serial line __COM#__
– Speed __115200__
– Connection type __Serial__

Click open, at the login prompt, type “`root“` and press Enter.: